|
| 브랜드 이름: | BLUWAT |
| 모델 번호: | 블루플록 |
| MOQ: | 1000KGS |
| 가격: | 협상 가능 |
| 배달 시간: | 7-10 근무일 이내 |
| 지불 조건: | D/A,D/P,L/C,T/T,웨스턴 유니온 |
BLUFLOC Oilfield Grade Polyacrylamide Powder is a high performance water soluble polymer designed for oil and gas drilling applications. It can be prepared at a recommended working concentration of 0.1 to 0.5 percent and used as a functional additive in water based drilling mud systems.
BLUFLOC Oilfield Grade Polyacrylamide Powder is a high performance water soluble polymer designed for oil and gas drilling applications. It can be prepared at a recommended working concentration of 0.1 to 0.5 percent and used as a functional additive in water based drilling mud systems.
In drilling operations, fluid loss control is one of the key requirements for stable mud performance. Excessive filtrate loss may cause water invasion into sensitive formations, shale swelling, borehole instability, poor mud cake quality and higher drilling risk.
BLUFLOC polyacrylamide helps improve drilling fluid structure, support filtration control and enhance the stability of the mud system.
This product is suitable for drilling fluid loss control, shale stabilization, drilling mud viscosity support, lubrication improvement, cuttings suspension and selected oilfield wastewater or mud water treatment applications.
Water soluble polyacrylamide powder designed for oil and gas drilling applications.
Recommended working concentration from 0.1 to 0.5 percent supports field solution preparation and dosing control.
Suitable for drilling fluid loss control in water based mud systems.
Helps improve mud structure and filtration behavior for better mud system stability.
Supports shale stabilization and borehole wall protection in sensitive formations.
Can improve drilling mud viscosity, suspension and rheological performance.
Helps enhance lubrication during drilling mud circulation and drilling operation.
Supports cuttings suspension and carrying capacity in water based drilling fluid systems.
20 to 100 mesh granular powder and minimum 89 percent solid content support stable industrial handling.
Low dosage requirement helps improve cost efficiency in oilfield drilling mud applications.
| Item | Specification |
|---|---|
| Product Name | Oilfield Grade Polyacrylamide Powder |
| Brand | BLUFLOC |
| Recommended Type | Anionic Polyacrylamide |
| Appearance | Off White Granular Powder |
| Particle Size | 20 to 100 Mesh |
| Molecular Weight Range | 5 to 25 Million for Anionic Type |
| Anionic Degree Range | 5 to 100 Percent |
| Solid Content | Minimum 89 Percent |
| Bulk Density | About 0.8 |
| Residual Monomer | Max 0.05 Percent |
| Recommended Working Concentration | 0.1 to 0.5 Percent |
| pH of 1 Percent Solution | Around 6 to 8 for Anionic Type |
| Storage Temperature | 0 to 35 Degree C |
| Shelf Life | 2 Years |
| Package | 25 kg Bag or 750 kg Big Bag |
| Available Documents | TDS, MSDS and COA |
BLUFLOC Oilfield Grade Polyacrylamide Powder helps support fluid loss control in water based drilling mud systems. By improving the polymer structure of the mud, it can help reduce excessive filtrate loss and support better borehole protection.
This product can be used as a functional additive in water based drilling fluid systems. It helps improve mud viscosity, suspension, lubrication and stability according to the selected grade and dosage.
In shale and clay rich formations, water invasion may cause swelling, dispersion and borehole instability. BLUFLOC PAM helps support shale stabilization by improving drilling fluid performance.
A stable drilling fluid system can help protect the borehole wall. Polyacrylamide supports better mud structure and helps improve the overall stability of the drilling process.
After proper dissolution, polyacrylamide forms a polymer solution that can improve lubrication in water based drilling mud. Better lubrication helps reduce friction during mud circulation and drilling operation.
Oilfield grade PAM can help improve drilling mud viscosity and rheology. This supports better suspension of cuttings, smoother circulation and more stable mud performance.
High molecular weight polyacrylamide helps improve the carrying capacity of drilling fluid. This helps suspend and transport drill cuttings more effectively during circulation.
Besides drilling fluid application, BLUFLOC PAM can also be used in selected oilfield wastewater clarification, drilling mud water treatment and solid liquid separation processes.
Bluwat can recommend HA7525, AA6518 or other customized anionic PAM grades according to drilling fluid requirements and field conditions.
The recommended working concentration of 0.1 to 0.5 percent is practical for oilfield operation because it provides a balance between viscosity, dosing control and solution handling.
A lower concentration solution is easier to pump and distribute in field dosing systems.
A properly prepared polymer solution helps avoid lumping and uneven dosing.
Stable concentration control supports more consistent drilling fluid performance.
Correct solution preparation helps reduce waste and improve field cost efficiency.
For oilfield drilling fluid loss control, the polymer should be fully dissolved before being added into the mud system. Incomplete dissolution may reduce filtration control, viscosity performance and overall mud stability.
After the powder is dissolved in water, the polymer chains form a viscous solution. When added into the drilling mud system, this solution can help improve mud structure, increase viscosity, support suspended solids control and reduce excessive fluid loss.
The polymer also helps improve the interaction between fine particles in the mud system, supporting better filtration behavior and more stable drilling fluid performance.
The actual dosage depends on drilling mud formulation, water quality, salinity, temperature, mud density, shale activity, target fluid loss level and required viscosity.
Laboratory testing or field trial is recommended before large scale use. For drilling fluid loss control, the product should be tested with the existing mud system to confirm compatibility with other additives such as salts, fluid loss reducers, lubricants, weighting agents, pH adjusters and viscosifiers.
Bluwat can provide product selection support and dosing recommendations according to customer field requirements.
Recommended working concentration from 0.1 to 0.5 percent supports stable solution preparation and field dosing.
Suitable for drilling fluid loss control in water based drilling mud systems.
Supports shale stabilization, borehole stability and borehole wall protection.
Can improve drilling mud viscosity, rheology and lubrication performance.
Useful for water based drilling mud systems requiring filtration control and stable performance.
Minimum 89 percent solid content and 20 to 100 mesh granular powder support reliable field use.
Low dosage requirement helps reduce field chemical cost and total treatment cost.
Factory direct supply from China with stable product quality and technical support.
TDS, MSDS and COA are available for oilfield buyers and distributors.
Customized molecular weight and anionic degree can be selected according to field requirements.
Bluwat Chemicals is a professional manufacturer and exporter of polyacrylamide and water treatment chemicals with more than 25 years of manufacturing experience.
Bluwat supplies anionic polyacrylamide, cationic polyacrylamide, nonionic polyacrylamide and emulsion polyacrylamide for oilfield drilling, EOR, wastewater treatment, mining, papermaking, municipal sewage treatment and sludge dewatering.
For oilfield customers, Bluwat can provide product selection advice, sample support, technical documents and customized PAM grades according to drilling fluid formulation, target performance and field conditions.
Oilfield grade polyacrylamide powder is used for drilling fluid loss control, shale stabilization, viscosity support, lubrication improvement, cuttings suspension and selected oilfield wastewater treatment applications.
The recommended working concentration is 0.1 to 0.5 percent.
Yes. It can help improve drilling mud structure and support fluid loss control in water based drilling fluid systems.
Yes. BLUFLOC oilfield grade PAM is suitable for water based drilling mud systems where filtration control, viscosity and stability are required.
Yes. By supporting fluid loss control, mud viscosity and shale stabilization, it can help improve borehole stability in sensitive formations.
Normally it takes about 1 hour under proper agitation conditions.
The recommended agitation speed is 200 to 400 rpm.
For best performance, it should be dissolved into a 0.1 to 0.5 percent solution before dosing. Direct dry powder addition may cause lumping and uneven performance.
Yes. Bluwat can recommend HA7525, AA6518 or other customized anionic PAM grades according to drilling fluid requirements and field conditions.
BLUFLOC Oilfield Grade Polyacrylamide Powder supports water based drilling mud fluid loss control, shale stabilization, viscosity improvement, lubrication support and cuttings suspension. Bluwat can provide factory direct supply, technical documents, sample support and customized PAM grade selection for oilfield customers.
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski