제품 상세정보
원래 장소: 중국
브랜드 이름: BLUWAT
인증: ISO9001, SGS, BV
모델 번호: BWD-01
지불과 운송 용어
최소 주문 수량: 1000kgs
가격: negotiable
포장 세부 사항: 30kgs, 50kgs, 250kgs, 1250kgs는 북을 칩니다
배달 시간: 정상적 15 근무일
공급 능력: 1000tons/w
상품 이름: |
BWD-01 물은 대리인을 소색시킵니다 |
또 다른 이름: |
폴리 디시안디아미드 포름알데히드 수지 |
고체 함량: |
>50% |
용법: |
유출하는 색깔 이전 화학 |
샘플: |
실험실 시험을 위해 자유롭습니다 |
생산력: |
4000Mt/m |
브랜드: |
BLUWAT |
어떤 CAS.: |
55295-98-2 |
pH 값: |
3-6 |
점착성 (25' C, 초당 주파수): |
50-300 |
비중(20°C에서): |
1.1-1.3 |
상품 이름: |
BWD-01 물은 대리인을 소색시킵니다 |
또 다른 이름: |
폴리 디시안디아미드 포름알데히드 수지 |
고체 함량: |
>50% |
용법: |
유출하는 색깔 이전 화학 |
샘플: |
실험실 시험을 위해 자유롭습니다 |
생산력: |
4000Mt/m |
브랜드: |
BLUWAT |
어떤 CAS.: |
55295-98-2 |
pH 값: |
3-6 |
점착성 (25' C, 초당 주파수): |
50-300 |
비중(20°C에서): |
1.1-1.3 |
Effluent Color Remove Chemicals De Color Agent Bluwat
Description: Water Clarifying Agent
Specifications:
Appearance: | Colorless and Translucid Liquid |
Solid Content: | 50%min |
Viscosity(25°C, cps): | 50-300 |
PH Value (30% Water Solution): | 3-6 |
Specific Gravity (at 20°C): | 1.1-1.3 |
Water Solubility: | Completely Soluble With Water at Any Rate |
Package: | 30kgs net plastic drum, 250kgs net plastic drum palletized, 1250kgs net IBC drum |
Storage Temperature: | Room temperature |
Competitive Advantage:
1 | High-performance treating high-coloring effluent from textile dyeing mills, pigment mills, printing ink, and paper mills. |
2 | As flocculant to de-color high-coloring effluent from dyestuffs processing plants. |
3 | Stronger decolorization (50%~99%) and removal of COD (50%~80%). |
4 | Can be used as a retention agent in paper & pulp processing |
5 | Faster sedimentation, better flocculation. |
6 | Non-pollution (no aluminum, chlorine, heavy metal ions, etc.). |
7 | It can be used before or after biological treatment. |
8 | Less sludge is produced than other inorganic coagulants. |
Application Methods:
1 | Before use, make BWD-01 with fresh water 40-50 times, to have 2-2.5% concentration solution. |
2 | Make PAC solution with 2-5% Al2O3 content. |
3 | Make a solution of Anionic flocculant with 0.1% concentration. |
4 | It is very important, to adjust the effluent pH value to 8-10, with higher or lower pH, BWD-01 works not well. |
5 | Add PAC solution, and mix with effluent completely. about 1-3 minutes |
6 | Add BWD-01 solution, mix with effluent completely, about 5-10 minutes |
7 | Add a small content of anionic polyelectrolyte solution, and mix slowly to have a big floc. (This step is a suggestion) |
8 | Sedimentation |
9 | Check the color of treated effluent |
10 | Adjust the dosage of BWD-01 and PAC to do more tests to have better testing results. |
Package and Storage:
Tags: